​​There are six designs in this set.  Part of each design is meant to be stitched with a twin needle (twin needle shadow work style). Included with your embroidery files will be a PDF (eleven pages) with notes on setting up your machine for stitching with a twin needle. Also included is a PDF with instructions for stitching a bonnet using a pre-made handkerchief.  To purchase a single bonnet design, scroll down to details below and use the button for the bonnet number you wish to buy.


I recommend a size 1.6 or 2.0 twin needle for all these designs.  PLEASE consult your machine manual for information on threading for twin needles.  Note that some machines offset the needle bar when in embroidery mode.  They will require a needle specifically for that machine and in size 1.6.  
Please check the chart below for height and width of your hoop to make sure the designs will fit your hoop.  


Suggested supplies for twin needle designs:

  • Two spools of selected thread; fine embroidery cotton is preferred.
  • Extra bobbin case, for adjustments OR adjustment to the case itself (such as a Bernina 830)
  • Twin needle, size 1.6 or 2.0.
  • 7mm  or 9mm needle plate
  • Machine embroidery foot with wide opening, large enough to accommodate the twin needle you choose.


Formats available: ART, DST, EXP, HUS, JEF, PES, VIP, VP3, and XXX. ​ The longer designs may not fit all hoops. ​Files will be sent within 24 hours of purchase.  If you do not find your files, please first check your spam box, then contact Jane@DesignedByJane.com.

Bonnet 2

Bonnet 4

Bonnet 3

Baby Bonnets

Bonnet 5

Single bonnet designs are $9.99 each and include the three PDF documents detailed above.

Bonnet 6

Bonnet 1

$24.99